Photo Album
-
Old Volvo 2003
Access after bulkhead and cabinet have been removed.
-
Old 2.5 inch exhaust through-hull
New exhuast is 2 inch. Rather than replace this part, a transition piece connected hose pieces of different diameter.
-
Bulkhead Tabbing
Glass tabbing was cut with a dremel wheel to remove the bulkhead from the boat.
-
Platforms to protect flooring
The engines sat on the upper platform while the beds were being worked.
-
A view down the hatch.
After the engine was moved to the platform, the ladder was removed.
-
Accessories
Fresh water pump and bilge pump are in space the new engine must occupy.
-
Old engine and beds.
Looking forward - these beds will be cut down to 3.5 inches at this end.
|